| 1 |
- # [ doc = r"Register block" ] # [ repr ( C ) ] pub struct RegisterBlock { # [ doc = "0x00 - safe accessing sign register" ] pub r8_safe_access_sig : crate :: Reg < r8_safe_access_sig :: R8_SAFE_ACCESS_SIG_SPEC > , # [ doc = "0x01 - chip ID register" ] pub r8_chip_id : crate :: Reg < r8_chip_id :: R8_CHIP_ID_SPEC > , # [ doc = "0x02 - safe accessing ID register" ] pub r8_safe_access_id : crate :: Reg < r8_safe_access_id :: R8_SAFE_ACCESS_ID_SPEC > , # [ doc = "0x03 - watch-dog count register" ] pub r8_wdog_count : crate :: Reg < r8_wdog_count :: R8_WDOG_COUNT_SPEC > , # [ doc = "0x04 - flash ROM configuration register" ] pub r8_glob_rom_cfg : crate :: Reg < r8_glob_rom_cfg :: R8_GLOB_ROM_CFG_SPEC > , # [ doc = "0x05 - reset status and boot/debug status" ] pub r8_rst_boot_stat : crate :: Reg < r8_rst_boot_stat :: R8_RST_BOOT_STAT_SPEC > , # [ doc = "0x06 - reset and watch-dog control" ] pub r8_rst_wdog_ctrl : crate :: Reg < r8_rst_wdog_ctrl :: R8_RST_WDOG_CTRL_SPEC > , # [ doc = "0x07 - value keeper during global reset" ] pub r8_glob_reset_keep : crate :: Reg < r8_glob_reset_keep :: R8_GLOB_RESET_KEEP_SPEC > , # [ doc = "0x08 - output clock divider from PLL" ] pub r8_clk_pll_div : crate :: Reg < r8_clk_pll_div :: R8_CLK_PLL_DIV_SPEC > , _reserved9 : [ u8 ; 0x01 ] , # [ doc = "0x0a - clock control" ] pub r8_clk_cfg_ctrl : crate :: Reg < r8_clk_cfg_ctrl :: R8_CLK_CFG_CTRL_SPEC > , # [ doc = "0x0b - clock mode aux register" ] pub r8_clk_mod_aux : crate :: Reg < r8_clk_mod_aux :: R8_CLK_MOD_AUX_SPEC > , # [ doc = "0x0c - sleep clock off control byte 0" ] pub r8_slp_clk_off0 : crate :: Reg < r8_slp_clk_off0 :: R8_SLP_CLK_OFF0_SPEC > , # [ doc = "0x0d - sleep clock off control byte 1" ] pub r8_slp_clk_off1 : crate :: Reg < r8_slp_clk_off1 :: R8_SLP_CLK_OFF1_SPEC > , # [ doc = "0x0e - wake control" ] pub r8_slp_wake_ctrl : crate :: Reg < r8_slp_wake_ctrl :: R8_SLP_WAKE_CTRL_SPEC > , # [ doc = "0x0f - power control" ] pub r8_slp_power_ctrl : crate :: Reg < r8_slp_power_ctrl :: R8_SLP_POWER_CTRL_SPEC > , _reserved15 : [ u8 ; 0x02 ] , # [ doc = "0x12 - alternate pin control" ] pub r8_pin_alternate : crate :: Reg < r8_pin_alternate :: R8_PIN_ALTERNATE_SPEC > , _reserved16 : [ u8 ; 0x09 ] , # [ doc = "0x1c - GPIO interrupt control" ] pub r8_gpio_int_flag : crate :: Reg < r8_gpio_int_flag :: R8_GPIO_INT_FLAG_SPEC > , # [ doc = "0x1d - GPIO interrupt enable" ] pub r8_gpio_int_enable : crate :: Reg < r8_gpio_int_enable :: R8_GPIO_INT_ENABLE_SPEC > , # [ doc = "0x1e - GPIO interrupt mode" ] pub r8_gpio_int_mode : crate :: Reg < r8_gpio_int_mode :: R8_GPIO_INT_MODE_SPEC > , # [ doc = "0x1f - GPIO interrupt polarity" ] pub r8_gpio_int_polar : crate :: Reg < r8_gpio_int_polar :: R8_GPIO_INT_POLAR_SPEC > , # [ doc = "0x20 - Serdes Analog parameter configuration1" ] pub r16_serd_ana_cfg1 : crate :: Reg < r16_serd_ana_cfg1 :: R16_SERD_ANA_CFG1_SPEC > , _reserved21 : [ u8 ; 0x02 ] , # [ doc = "0x24 - Serdes Analog parameter configuration2" ] pub r32_serd_ana_cfg2 : crate :: Reg < r32_serd_ana_cfg2 :: R32_SERD_ANA_CFG2_SPEC > , _reserved22 : [ u8 ; 0x18 ] , # [ doc = "0x40 - GPIO PA I/O direction" ] pub r32_pa_dir : crate :: Reg < r32_pa_dir :: R32_PA_DIR_SPEC > , # [ doc = "0x44 - GPIO PA input" ] pub r32_pa_pin : crate :: Reg < r32_pa_pin :: R32_PA_PIN_SPEC > , # [ doc = "0x48 - GPIO PA output" ] pub r32_pa_out : crate :: Reg < r32_pa_out :: R32_PA_OUT_SPEC > , # [ doc = "0x4c - GPIO PA clear output" ] pub r32_pa_clr : crate :: Reg < r32_pa_clr :: R32_PA_CLR_SPEC > , # [ doc = "0x50 - GPIO PA pullup resistance enable" ] pub r32_pa_pu : crate :: Reg < r32_pa_pu :: R32_PA_PU_SPEC > , # [ doc = "0x54 - GPIO PA output open-drain and input pulldown resistance enable" ] pub r32_pa_pd : crate :: Reg < r32_pa_pd :: R32_PA_PD_SPEC > , # [ doc = "0x58 - GPIO PA driving capability" ] pub r32_pa_drv : crate :: Reg < r32_pa_drv :: R32_PA_DRV_SPEC > , # [ doc = "0x5c - GPIO PA output slew rate and input schmitt trigger" ] pub r32_pa_smt : crate :: Reg < r32_pa_smt :: R32_PA_SMT_SPEC > , # [ doc = "0x60 - GPIO PB I/O direction" ] pub r32_pb_dir : crate :: Reg < r32_pb_dir :: R32_PB_DIR_SPEC > , # [ doc = "0x64 - GPIO PB input" ] pub r32_pb_pin : crate :: Reg < r32_pb_pin :: R32_PB_PIN_SPEC > , # [ doc = "0x68 - GPIO PB output" ] pub r32_pb_out : crate :: Reg < r32_pb_out :: R32_PB_OUT_SPEC > , # [ doc = "0x6c - GPIO PB clear output" ] pub r32_pb_clr : crate :: Reg < r32_pb_clr :: R32_PB_CLR_SPEC > , # [ doc = "0x70 - GPIO PB pullup resistance enable" ] pub r32_pb_pu : crate :: Reg < r32_pb_pu :: R32_PB_PU_SPEC > , # [ doc = "0x74 - GPIO PB output open-drain and input pulldown resistance enable" ] pub r32_pb_pd : crate :: Reg < r32_pb_pd :: R32_PB_PD_SPEC > , # [ doc = "0x78 - GPIO PB driving capability" ] pub r32_pb_drv : crate :: Reg < r32_pb_drv :: R32_PB_DRV_SPEC > , # [ doc = "0x7c - GPIO PB output slew rate and input schmitt trigger" ] pub r32_pb_smt : crate :: Reg < r32_pb_smt :: R32_PB_SMT_SPEC > , } # [ doc = "R8_SAFE_ACCESS_SIG register accessor: an alias for `Reg<R8_SAFE_ACCESS_SIG_SPEC>`" ] pub type R8_SAFE_ACCESS_SIG = crate :: Reg < r8_safe_access_sig :: R8_SAFE_ACCESS_SIG_SPEC > ; # [ doc = "safe accessing sign register" ] pub mod r8_safe_access_sig ; # [ doc = "R8_CHIP_ID register accessor: an alias for `Reg<R8_CHIP_ID_SPEC>`" ] pub type R8_CHIP_ID = crate :: Reg < r8_chip_id :: R8_CHIP_ID_SPEC > ; # [ doc = "chip ID register" ] pub mod r8_chip_id ; # [ doc = "R8_SAFE_ACCESS_ID register accessor: an alias for `Reg<R8_SAFE_ACCESS_ID_SPEC>`" ] pub type R8_SAFE_ACCESS_ID = crate :: Reg < r8_safe_access_id :: R8_SAFE_ACCESS_ID_SPEC > ; # [ doc = "safe accessing ID register" ] pub mod r8_safe_access_id ; # [ doc = "R8_WDOG_COUNT register accessor: an alias for `Reg<R8_WDOG_COUNT_SPEC>`" ] pub type R8_WDOG_COUNT = crate :: Reg < r8_wdog_count :: R8_WDOG_COUNT_SPEC > ; # [ doc = "watch-dog count register" ] pub mod r8_wdog_count ; # [ doc = "R8_GLOB_ROM_CFG register accessor: an alias for `Reg<R8_GLOB_ROM_CFG_SPEC>`" ] pub type R8_GLOB_ROM_CFG = crate :: Reg < r8_glob_rom_cfg :: R8_GLOB_ROM_CFG_SPEC > ; # [ doc = "flash ROM configuration register" ] pub mod r8_glob_rom_cfg ; # [ doc = "R8_RST_BOOT_STAT register accessor: an alias for `Reg<R8_RST_BOOT_STAT_SPEC>`" ] pub type R8_RST_BOOT_STAT = crate :: Reg < r8_rst_boot_stat :: R8_RST_BOOT_STAT_SPEC > ; # [ doc = "reset status and boot/debug status" ] pub mod r8_rst_boot_stat ; # [ doc = "R8_RST_WDOG_CTRL register accessor: an alias for `Reg<R8_RST_WDOG_CTRL_SPEC>`" ] pub type R8_RST_WDOG_CTRL = crate :: Reg < r8_rst_wdog_ctrl :: R8_RST_WDOG_CTRL_SPEC > ; # [ doc = "reset and watch-dog control" ] pub mod r8_rst_wdog_ctrl ; # [ doc = "R8_GLOB_RESET_KEEP register accessor: an alias for `Reg<R8_GLOB_RESET_KEEP_SPEC>`" ] pub type R8_GLOB_RESET_KEEP = crate :: Reg < r8_glob_reset_keep :: R8_GLOB_RESET_KEEP_SPEC > ; # [ doc = "value keeper during global reset" ] pub mod r8_glob_reset_keep ; # [ doc = "R8_CLK_PLL_DIV register accessor: an alias for `Reg<R8_CLK_PLL_DIV_SPEC>`" ] pub type R8_CLK_PLL_DIV = crate :: Reg < r8_clk_pll_div :: R8_CLK_PLL_DIV_SPEC > ; # [ doc = "output clock divider from PLL" ] pub mod r8_clk_pll_div ; # [ doc = "R8_CLK_CFG_CTRL register accessor: an alias for `Reg<R8_CLK_CFG_CTRL_SPEC>`" ] pub type R8_CLK_CFG_CTRL = crate :: Reg < r8_clk_cfg_ctrl :: R8_CLK_CFG_CTRL_SPEC > ; # [ doc = "clock control" ] pub mod r8_clk_cfg_ctrl ; # [ doc = "R8_CLK_MOD_AUX register accessor: an alias for `Reg<R8_CLK_MOD_AUX_SPEC>`" ] pub type R8_CLK_MOD_AUX = crate :: Reg < r8_clk_mod_aux :: R8_CLK_MOD_AUX_SPEC > ; # [ doc = "clock mode aux register" ] pub mod r8_clk_mod_aux ; # [ doc = "R8_SLP_CLK_OFF0 register accessor: an alias for `Reg<R8_SLP_CLK_OFF0_SPEC>`" ] pub type R8_SLP_CLK_OFF0 = crate :: Reg < r8_slp_clk_off0 :: R8_SLP_CLK_OFF0_SPEC > ; # [ doc = "sleep clock off control byte 0" ] pub mod r8_slp_clk_off0 ; # [ doc = "R8_SLP_CLK_OFF1 register accessor: an alias for `Reg<R8_SLP_CLK_OFF1_SPEC>`" ] pub type R8_SLP_CLK_OFF1 = crate :: Reg < r8_slp_clk_off1 :: R8_SLP_CLK_OFF1_SPEC > ; # [ doc = "sleep clock off control byte 1" ] pub mod r8_slp_clk_off1 ; # [ doc = "R8_SLP_WAKE_CTRL register accessor: an alias for `Reg<R8_SLP_WAKE_CTRL_SPEC>`" ] pub type R8_SLP_WAKE_CTRL = crate :: Reg < r8_slp_wake_ctrl :: R8_SLP_WAKE_CTRL_SPEC > ; # [ doc = "wake control" ] pub mod r8_slp_wake_ctrl ; # [ doc = "R8_SLP_POWER_CTRL register accessor: an alias for `Reg<R8_SLP_POWER_CTRL_SPEC>`" ] pub type R8_SLP_POWER_CTRL = crate :: Reg < r8_slp_power_ctrl :: R8_SLP_POWER_CTRL_SPEC > ; # [ doc = "power control" ] pub mod r8_slp_power_ctrl ; # [ doc = "R16_SERD_ANA_CFG1 register accessor: an alias for `Reg<R16_SERD_ANA_CFG1_SPEC>`" ] pub type R16_SERD_ANA_CFG1 = crate :: Reg < r16_serd_ana_cfg1 :: R16_SERD_ANA_CFG1_SPEC > ; # [ doc = "Serdes Analog parameter configuration1" ] pub mod r16_serd_ana_cfg1 ; # [ doc = "R32_SERD_ANA_CFG2 register accessor: an alias for `Reg<R32_SERD_ANA_CFG2_SPEC>`" ] pub type R32_SERD_ANA_CFG2 = crate :: Reg < r32_serd_ana_cfg2 :: R32_SERD_ANA_CFG2_SPEC > ; # [ doc = "Serdes Analog parameter configuration2" ] pub mod r32_serd_ana_cfg2 ; # [ doc = "R8_GPIO_INT_FLAG register accessor: an alias for `Reg<R8_GPIO_INT_FLAG_SPEC>`" ] pub type R8_GPIO_INT_FLAG = crate :: Reg < r8_gpio_int_flag :: R8_GPIO_INT_FLAG_SPEC > ; # [ doc = "GPIO interrupt control" ] pub mod r8_gpio_int_flag ; # [ doc = "R8_GPIO_INT_ENABLE register accessor: an alias for `Reg<R8_GPIO_INT_ENABLE_SPEC>`" ] pub type R8_GPIO_INT_ENABLE = crate :: Reg < r8_gpio_int_enable :: R8_GPIO_INT_ENABLE_SPEC > ; # [ doc = "GPIO interrupt enable" ] pub mod r8_gpio_int_enable ; # [ doc = "R8_GPIO_INT_MODE register accessor: an alias for `Reg<R8_GPIO_INT_MODE_SPEC>`" ] pub type R8_GPIO_INT_MODE = crate :: Reg < r8_gpio_int_mode :: R8_GPIO_INT_MODE_SPEC > ; # [ doc = "GPIO interrupt mode" ] pub mod r8_gpio_int_mode ; # [ doc = "R8_GPIO_INT_POLAR register accessor: an alias for `Reg<R8_GPIO_INT_POLAR_SPEC>`" ] pub type R8_GPIO_INT_POLAR = crate :: Reg < r8_gpio_int_polar :: R8_GPIO_INT_POLAR_SPEC > ; # [ doc = "GPIO interrupt polarity" ] pub mod r8_gpio_int_polar ; # [ doc = "R32_PA_DIR register accessor: an alias for `Reg<R32_PA_DIR_SPEC>`" ] pub type R32_PA_DIR = crate :: Reg < r32_pa_dir :: R32_PA_DIR_SPEC > ; # [ doc = "GPIO PA I/O direction" ] pub mod r32_pa_dir ; # [ doc = "R32_PA_PIN register accessor: an alias for `Reg<R32_PA_PIN_SPEC>`" ] pub type R32_PA_PIN = crate :: Reg < r32_pa_pin :: R32_PA_PIN_SPEC > ; # [ doc = "GPIO PA input" ] pub mod r32_pa_pin ; # [ doc = "R32_PA_OUT register accessor: an alias for `Reg<R32_PA_OUT_SPEC>`" ] pub type R32_PA_OUT = crate :: Reg < r32_pa_out :: R32_PA_OUT_SPEC > ; # [ doc = "GPIO PA output" ] pub mod r32_pa_out ; # [ doc = "R32_PA_CLR register accessor: an alias for `Reg<R32_PA_CLR_SPEC>`" ] pub type R32_PA_CLR = crate :: Reg < r32_pa_clr :: R32_PA_CLR_SPEC > ; # [ doc = "GPIO PA clear output" ] pub mod r32_pa_clr ; # [ doc = "R32_PA_PU register accessor: an alias for `Reg<R32_PA_PU_SPEC>`" ] pub type R32_PA_PU = crate :: Reg < r32_pa_pu :: R32_PA_PU_SPEC > ; # [ doc = "GPIO PA pullup resistance enable" ] pub mod r32_pa_pu ; # [ doc = "R32_PA_PD register accessor: an alias for `Reg<R32_PA_PD_SPEC>`" ] pub type R32_PA_PD = crate :: Reg < r32_pa_pd :: R32_PA_PD_SPEC > ; # [ doc = "GPIO PA output open-drain and input pulldown resistance enable" ] pub mod r32_pa_pd ; # [ doc = "R32_PA_DRV register accessor: an alias for `Reg<R32_PA_DRV_SPEC>`" ] pub type R32_PA_DRV = crate :: Reg < r32_pa_drv :: R32_PA_DRV_SPEC > ; # [ doc = "GPIO PA driving capability" ] pub mod r32_pa_drv ; # [ doc = "R32_PA_SMT register accessor: an alias for `Reg<R32_PA_SMT_SPEC>`" ] pub type R32_PA_SMT = crate :: Reg < r32_pa_smt :: R32_PA_SMT_SPEC > ; # [ doc = "GPIO PA output slew rate and input schmitt trigger" ] pub mod r32_pa_smt ; # [ doc = "R32_PB_DIR register accessor: an alias for `Reg<R32_PB_DIR_SPEC>`" ] pub type R32_PB_DIR = crate :: Reg < r32_pb_dir :: R32_PB_DIR_SPEC > ; # [ doc = "GPIO PB I/O direction" ] pub mod r32_pb_dir ; # [ doc = "R32_PB_PIN register accessor: an alias for `Reg<R32_PB_PIN_SPEC>`" ] pub type R32_PB_PIN = crate :: Reg < r32_pb_pin :: R32_PB_PIN_SPEC > ; # [ doc = "GPIO PB input" ] pub mod r32_pb_pin ; # [ doc = "R32_PB_OUT register accessor: an alias for `Reg<R32_PB_OUT_SPEC>`" ] pub type R32_PB_OUT = crate :: Reg < r32_pb_out :: R32_PB_OUT_SPEC > ; # [ doc = "GPIO PB output" ] pub mod r32_pb_out ; # [ doc = "R32_PB_CLR register accessor: an alias for `Reg<R32_PB_CLR_SPEC>`" ] pub type R32_PB_CLR = crate :: Reg < r32_pb_clr :: R32_PB_CLR_SPEC > ; # [ doc = "GPIO PB clear output" ] pub mod r32_pb_clr ; # [ doc = "R32_PB_PU register accessor: an alias for `Reg<R32_PB_PU_SPEC>`" ] pub type R32_PB_PU = crate :: Reg < r32_pb_pu :: R32_PB_PU_SPEC > ; # [ doc = "GPIO PB pullup resistance enable" ] pub mod r32_pb_pu ; # [ doc = "R32_PB_PD register accessor: an alias for `Reg<R32_PB_PD_SPEC>`" ] pub type R32_PB_PD = crate :: Reg < r32_pb_pd :: R32_PB_PD_SPEC > ; # [ doc = "GPIO PB output open-drain and input pulldown resistance enable" ] pub mod r32_pb_pd ; # [ doc = "R32_PB_DRV register accessor: an alias for `Reg<R32_PB_DRV_SPEC>`" ] pub type R32_PB_DRV = crate :: Reg < r32_pb_drv :: R32_PB_DRV_SPEC > ; # [ doc = "GPIO PB driving capability" ] pub mod r32_pb_drv ; # [ doc = "R32_PB_SMT register accessor: an alias for `Reg<R32_PB_SMT_SPEC>`" ] pub type R32_PB_SMT = crate :: Reg < r32_pb_smt :: R32_PB_SMT_SPEC > ; # [ doc = "GPIO PB output slew rate and input schmitt trigger" ] pub mod r32_pb_smt ; # [ doc = "R8_PIN_ALTERNATE register accessor: an alias for `Reg<R8_PIN_ALTERNATE_SPEC>`" ] pub type R8_PIN_ALTERNATE = crate :: Reg < r8_pin_alternate :: R8_PIN_ALTERNATE_SPEC > ; # [ doc = "alternate pin control" ] pub mod r8_pin_alternate ;
|
