| 1 |
- # [ doc = r"Register block" ] # [ repr ( C ) ] pub struct RegisterBlock { # [ doc = "0x00 - USB base control" ] pub r8_usb_ctrl : crate :: Reg < r8_usb_ctrl :: R8_USB_CTRL_SPEC > , # [ doc = "0x01 - USB host control register" ] pub r8_uhost_ctrl : crate :: Reg < r8_uhost_ctrl :: R8_UHOST_CTRL_SPEC > , # [ doc = "0x02 - USB interrupt enable" ] pub r8_usb_int_en : crate :: Reg < r8_usb_int_en :: R8_USB_INT_EN_SPEC > , # [ doc = "0x03 - USB device address" ] pub r8_usb_dev_ad : crate :: Reg < r8_usb_dev_ad :: R8_USB_DEV_AD_SPEC > , # [ doc = "0x04 - USB frame number register" ] pub r16_usb_frame_no : crate :: Reg < r16_usb_frame_no :: R16_USB_FRAME_NO_SPEC > , # [ doc = "0x06 - USB suspend register" ] pub r8_usb_suspend : crate :: Reg < r8_usb_suspend :: R8_USB_SUSPEND_SPEC > , _reserved6 : [ u8 ; 0x01 ] , # [ doc = "0x08 - USB actual speed register" ] pub r8_usb_spd_type : crate :: Reg < r8_usb_spd_type :: R8_USB_SPD_TYPE_SPEC > , # [ doc = "0x09 - USB miscellaneous status" ] pub r8_usb_mis_st : crate :: Reg < r8_usb_mis_st :: R8_USB_MIS_ST_SPEC > , # [ doc = "0x0a - USB interrupt flag" ] pub r8_usb_int_fg : crate :: Reg < r8_usb_int_fg :: R8_USB_INT_FG_SPEC > , # [ doc = "0x0b - USB interrupt status" ] pub r8_usb_int_st : crate :: Reg < r8_usb_int_st :: R8_USB_INT_ST_SPEC > , # [ doc = "0x0c - USB receiving length" ] pub r6_usb_rx_len : crate :: Reg < r6_usb_rx_len :: R6_USB_RX_LEN_SPEC > , _reserved11 : [ u8 ; 0x02 ] , # [ doc = "0x10 - endpoint 1(9) 4(8,12) mode" ] pub r8_uep4_1_mod : crate :: Reg < r8_uep4_1_mod :: R8_UEP4_1_MOD_SPEC > , # [ doc = "0x11 - endpoint 2(10) 3(11) mode and USB host endpoint mode control register" ] pub r8_uep2_3_mod_r8_uh_ep_mod : crate :: Reg < r8_uep2_3_mod_r8_uh_ep_mod :: R8_UEP2_3_MOD_R8_UH_EP_MOD_SPEC > , # [ doc = "0x12 - endpoint 5(13) 6(14) mode" ] pub r8_uep5_6_mod : crate :: Reg < r8_uep5_6_mod :: R8_UEP5_6_MOD_SPEC > , # [ doc = "0x13 - endpoint 7(15) mode" ] pub r8_uep7_mod : crate :: Reg < r8_uep7_mod :: R8_UEP7_MOD_SPEC > , # [ doc = "0x14 - endpoint 0 DMA buffer address" ] pub r32_uep0_rt_dma : crate :: Reg < r32_uep0_rt_dma :: R32_UEP0_RT_DMA_SPEC > , # [ doc = "0x18 - endpoint 1 DMA buffer address" ] pub r32_uep1_rx_dma : crate :: Reg < r32_uep1_rx_dma :: R32_UEP1_RX_DMA_SPEC > , # [ doc = "0x1c - endpoint 2 DMA buffer address _ host rx endpoint buffer start address" ] pub r32_uep2_rx_dma_r32_uh_rx_dma : crate :: Reg < r32_uep2_rx_dma_r32_uh_rx_dma :: R32_UEP2_RX_DMA_R32_UH_RX_DMA_SPEC > , # [ doc = "0x20 - endpoint 3 DMA buffer address;host tx endpoint buffer high address" ] pub r32_uep3_rx_dma : crate :: Reg < r32_uep3_rx_dma :: R32_UEP3_RX_DMA_SPEC > , # [ doc = "0x24 - endpoint 4 DMA buffer address" ] pub r32_uep4_rx_dma : crate :: Reg < r32_uep4_rx_dma :: R32_UEP4_RX_DMA_SPEC > , # [ doc = "0x28 - endpoint 5 DMA buffer address" ] pub r32_uep5_rx_dma : crate :: Reg < r32_uep5_rx_dma :: R32_UEP5_RX_DMA_SPEC > , # [ doc = "0x2c - endpoint 6 DMA buffer address" ] pub r32_uep6_rx_dma : crate :: Reg < r32_uep6_rx_dma :: R32_UEP6_RX_DMA_SPEC > , # [ doc = "0x30 - endpoint 7 DMA buffer address" ] pub r32_uep7_rx_dma : crate :: Reg < r32_uep7_rx_dma :: R32_UEP7_RX_DMA_SPEC > , # [ doc = "0x34 - endpoint 1 DMA TX buffer address" ] pub r32_uep1_tx_dma : crate :: Reg < r32_uep1_tx_dma :: R32_UEP1_TX_DMA_SPEC > , # [ doc = "0x38 - endpoint 2 DMA TX buffer address" ] pub r32_uep2_tx_dma : crate :: Reg < r32_uep2_tx_dma :: R32_UEP2_TX_DMA_SPEC > , # [ doc = "0x3c - endpoint 3 DMA TX buffer address and host tx endpoint buffer start address" ] pub r32_uep3_tx_dma_r32_uh_tx_dma : crate :: Reg < r32_uep3_tx_dma_r32_uh_tx_dma :: R32_UEP3_TX_DMA_R32_UH_TX_DMA_SPEC > , # [ doc = "0x40 - endpoint 4 DMA TX buffer address" ] pub r32_uep4_tx_dma : crate :: Reg < r32_uep4_tx_dma :: R32_UEP4_TX_DMA_SPEC > , # [ doc = "0x44 - endpoint 5 DMA TX buffer address" ] pub r32_uep5_tx_dma : crate :: Reg < r32_uep5_tx_dma :: R32_UEP5_TX_DMA_SPEC > , # [ doc = "0x48 - endpoint 4 DMA TX buffer address" ] pub r32_uep6_tx_dma : crate :: Reg < r32_uep6_tx_dma :: R32_UEP6_TX_DMA_SPEC > , # [ doc = "0x4c - endpoint 7 DMA TX buffer address" ] pub r32_uep7_tx_dma : crate :: Reg < r32_uep7_tx_dma :: R32_UEP7_TX_DMA_SPEC > , # [ doc = "0x50 - endpoint 0 receive max length" ] pub r16_uep0_max_len : crate :: Reg < r16_uep0_max_len :: R16_UEP0_MAX_LEN_SPEC > , _reserved31 : [ u8 ; 0x02 ] , # [ doc = "0x54 - endpoint 1 receive max length" ] pub r16_uep1_max_len : crate :: Reg < r16_uep1_max_len :: R16_UEP1_MAX_LEN_SPEC > , _reserved32 : [ u8 ; 0x02 ] , # [ doc = "0x58 - endpoint 2 receive max length and USB host receive max packet length register" ] pub r16_uep2_max_len_r16_uh_max_len : crate :: Reg < r16_uep2_max_len_r16_uh_max_len :: R16_UEP2_MAX_LEN_R16_UH_MAX_LEN_SPEC > , _reserved33 : [ u8 ; 0x02 ] , # [ doc = "0x5c - endpoint 3 receive max length" ] pub r16_uep3_max_len : crate :: Reg < r16_uep3_max_len :: R16_UEP3_MAX_LEN_SPEC > , _reserved34 : [ u8 ; 0x02 ] , # [ doc = "0x60 - endpoint 4 receive max length" ] pub r16_uep4_max_len : crate :: Reg < r16_uep4_max_len :: R16_UEP4_MAX_LEN_SPEC > , _reserved35 : [ u8 ; 0x02 ] , # [ doc = "0x64 - endpoint 5 receive max length" ] pub r16_uep5_max_len : crate :: Reg < r16_uep5_max_len :: R16_UEP5_MAX_LEN_SPEC > , _reserved36 : [ u8 ; 0x02 ] , # [ doc = "0x68 - endpoint 6 receive max length" ] pub r16_uep6_max_len : crate :: Reg < r16_uep6_max_len :: R16_UEP6_MAX_LEN_SPEC > , _reserved37 : [ u8 ; 0x02 ] , # [ doc = "0x6c - endpoint 7 receive max length" ] pub r16_uep7_max_len : crate :: Reg < r16_uep7_max_len :: R16_UEP7_MAX_LEN_SPEC > , _reserved38 : [ u8 ; 0x02 ] , # [ doc = "0x70 - endpoint 0 transmittal length" ] pub r16_uep0_t_len : crate :: Reg < r16_uep0_t_len :: R16_UEP0_T_LEN_SPEC > , # [ doc = "0x72 - endpoint 0 tx control" ] pub r8_uep0_tx_ctrl : crate :: Reg < r8_uep0_tx_ctrl :: R8_UEP0_TX_CTRL_SPEC > , # [ doc = "0x73 - endpoint 0 rx control" ] pub r8_uep0_rx_ctrl : crate :: Reg < r8_uep0_rx_ctrl :: R8_UEP0_RX_CTRL_SPEC > , # [ doc = "0x74 - endpoint 1 transmittal length" ] pub r16_uep1_t_len : crate :: Reg < r16_uep1_t_len :: R16_UEP1_T_LEN_SPEC > , # [ doc = "0x76 - endpoint 1 tx control" ] pub r8_uep1_tx_ctrl : crate :: Reg < r8_uep1_tx_ctrl :: R8_UEP1_TX_CTRL_SPEC > , # [ doc = "0x77 - endpoint 1 rx control" ] pub r8_uep1_rx_ctrl : crate :: Reg < r8_uep1_rx_ctrl :: R8_UEP1_RX_CTRL_SPEC > , # [ doc = "0x78 - endpoint 2 transmittal length and Set usb host token register" ] pub r16_uep2_t_len_r16_uh_ep_pid : crate :: Reg < r16_uep2_t_len_r16_uh_ep_pid :: R16_UEP2_T_LEN_R16_UH_EP_PID_SPEC > , # [ doc = "0x7a - endpoint 2 tx control" ] pub r8_uep2_tx_ctrl : crate :: Reg < r8_uep2_tx_ctrl :: R8_UEP2_TX_CTRL_SPEC > , # [ doc = "0x7b - endpoint 2 rx control and USb host receive endpoint control register" ] pub r8_uep2_rx_ctrl_r8_uh_rx_ctrl : crate :: Reg < r8_uep2_rx_ctrl_r8_uh_rx_ctrl :: R8_UEP2_RX_CTRL_R8_UH_RX_CTRL_SPEC > , # [ doc = "0x7c - endpoint 3 transmittal length and host transmittal endpoint transmittal length" ] pub r16_uep3_t_len_r16_uh_tx_len : crate :: Reg < r16_uep3_t_len_r16_uh_tx_len :: R16_UEP3_T_LEN_R16_UH_TX_LEN_SPEC > , # [ doc = "0x7e - endpoint 3 tx control and host transmittal endpoint control" ] pub r8_uep3_tx_ctrl_r8_uh_tx_ctrl : crate :: Reg < r8_uep3_tx_ctrl_r8_uh_tx_ctrl :: R8_UEP3_TX_CTRL_R8_UH_TX_CTRL_SPEC > , # [ doc = "0x7f - endpoint 3 rx control" ] pub r8_uep3_rx_ctrl : crate :: Reg < r8_uep3_rx_ctrl :: R8_UEP3_RX_CTRL_SPEC > , # [ doc = "0x80 - endpoint 4 transmittal length and USB host Tx SPLIT packet data" ] pub r16_uep4_t_len_r16_uh_split_data : crate :: Reg < r16_uep4_t_len_r16_uh_split_data :: R16_UEP4_T_LEN_R16_UH_SPLIT_DATA_SPEC > , # [ doc = "0x82 - endpoint 4 tx control" ] pub r8_uep4_tx_ctrl : crate :: Reg < r8_uep4_tx_ctrl :: R8_UEP4_TX_CTRL_SPEC > , # [ doc = "0x83 - endpoint 4 rx control" ] pub r8_uep4_rx_ctrl : crate :: Reg < r8_uep4_rx_ctrl :: R8_UEP4_RX_CTRL_SPEC > , # [ doc = "0x84 - endpoint 5 transmittal length" ] pub r16_uep5_t_len : crate :: Reg < r16_uep5_t_len :: R16_UEP5_T_LEN_SPEC > , # [ doc = "0x86 - endpoint 5 tx control" ] pub r8_uep5_tx_ctrl : crate :: Reg < r8_uep5_tx_ctrl :: R8_UEP5_TX_CTRL_SPEC > , # [ doc = "0x87 - endpoint 5 rx control" ] pub r8_uep5_rx_ctrl : crate :: Reg < r8_uep5_rx_ctrl :: R8_UEP5_RX_CTRL_SPEC > , # [ doc = "0x88 - endpoint 6 transmittal length" ] pub r16_uep6_t_len : crate :: Reg < r16_uep6_t_len :: R16_UEP6_T_LEN_SPEC > , # [ doc = "0x8a - endpoint 6 tx control" ] pub r8_uep6_tx_ctrl : crate :: Reg < r8_uep6_tx_ctrl :: R8_UEP6_TX_CTRL_SPEC > , # [ doc = "0x8b - endpoint 6 rx control" ] pub r8_uep6_rx_ctrl : crate :: Reg < r8_uep6_rx_ctrl :: R8_UEP6_RX_CTRL_SPEC > , # [ doc = "0x8c - endpoint 7 transmittal length" ] pub r16_uep7_t_len : crate :: Reg < r16_uep7_t_len :: R16_UEP7_T_LEN_SPEC > , # [ doc = "0x8e - endpoint 7 tx control" ] pub r8_uep7_tx_ctrl : crate :: Reg < r8_uep7_tx_ctrl :: R8_UEP7_TX_CTRL_SPEC > , # [ doc = "0x8f - endpoint 7 rx control" ] pub r8_uep7_rx_ctrl : crate :: Reg < r8_uep7_rx_ctrl :: R8_UEP7_RX_CTRL_SPEC > , } # [ doc = "R8_USB_CTRL register accessor: an alias for `Reg<R8_USB_CTRL_SPEC>`" ] pub type R8_USB_CTRL = crate :: Reg < r8_usb_ctrl :: R8_USB_CTRL_SPEC > ; # [ doc = "USB base control" ] pub mod r8_usb_ctrl ; # [ doc = "R8_UHOST_CTRL register accessor: an alias for `Reg<R8_UHOST_CTRL_SPEC>`" ] pub type R8_UHOST_CTRL = crate :: Reg < r8_uhost_ctrl :: R8_UHOST_CTRL_SPEC > ; # [ doc = "USB host control register" ] pub mod r8_uhost_ctrl ; # [ doc = "R8_USB_INT_EN register accessor: an alias for `Reg<R8_USB_INT_EN_SPEC>`" ] pub type R8_USB_INT_EN = crate :: Reg < r8_usb_int_en :: R8_USB_INT_EN_SPEC > ; # [ doc = "USB interrupt enable" ] pub mod r8_usb_int_en ; # [ doc = "R8_USB_DEV_AD register accessor: an alias for `Reg<R8_USB_DEV_AD_SPEC>`" ] pub type R8_USB_DEV_AD = crate :: Reg < r8_usb_dev_ad :: R8_USB_DEV_AD_SPEC > ; # [ doc = "USB device address" ] pub mod r8_usb_dev_ad ; # [ doc = "R16_USB_FRAME_NO register accessor: an alias for `Reg<R16_USB_FRAME_NO_SPEC>`" ] pub type R16_USB_FRAME_NO = crate :: Reg < r16_usb_frame_no :: R16_USB_FRAME_NO_SPEC > ; # [ doc = "USB frame number register" ] pub mod r16_usb_frame_no ; # [ doc = "R8_USB_SUSPEND register accessor: an alias for `Reg<R8_USB_SUSPEND_SPEC>`" ] pub type R8_USB_SUSPEND = crate :: Reg < r8_usb_suspend :: R8_USB_SUSPEND_SPEC > ; # [ doc = "USB suspend register" ] pub mod r8_usb_suspend ; # [ doc = "R8_USB_SPD_TYPE register accessor: an alias for `Reg<R8_USB_SPD_TYPE_SPEC>`" ] pub type R8_USB_SPD_TYPE = crate :: Reg < r8_usb_spd_type :: R8_USB_SPD_TYPE_SPEC > ; # [ doc = "USB actual speed register" ] pub mod r8_usb_spd_type ; # [ doc = "R8_USB_MIS_ST register accessor: an alias for `Reg<R8_USB_MIS_ST_SPEC>`" ] pub type R8_USB_MIS_ST = crate :: Reg < r8_usb_mis_st :: R8_USB_MIS_ST_SPEC > ; # [ doc = "USB miscellaneous status" ] pub mod r8_usb_mis_st ; # [ doc = "R8_USB_INT_FG register accessor: an alias for `Reg<R8_USB_INT_FG_SPEC>`" ] pub type R8_USB_INT_FG = crate :: Reg < r8_usb_int_fg :: R8_USB_INT_FG_SPEC > ; # [ doc = "USB interrupt flag" ] pub mod r8_usb_int_fg ; # [ doc = "R8_USB_INT_ST register accessor: an alias for `Reg<R8_USB_INT_ST_SPEC>`" ] pub type R8_USB_INT_ST = crate :: Reg < r8_usb_int_st :: R8_USB_INT_ST_SPEC > ; # [ doc = "USB interrupt status" ] pub mod r8_usb_int_st ; # [ doc = "R6_USB_RX_LEN register accessor: an alias for `Reg<R6_USB_RX_LEN_SPEC>`" ] pub type R6_USB_RX_LEN = crate :: Reg < r6_usb_rx_len :: R6_USB_RX_LEN_SPEC > ; # [ doc = "USB receiving length" ] pub mod r6_usb_rx_len ; # [ doc = "R8_UEP4_1_MOD register accessor: an alias for `Reg<R8_UEP4_1_MOD_SPEC>`" ] pub type R8_UEP4_1_MOD = crate :: Reg < r8_uep4_1_mod :: R8_UEP4_1_MOD_SPEC > ; # [ doc = "endpoint 1(9) 4(8,12) mode" ] pub mod r8_uep4_1_mod ; # [ doc = "R8_UEP2_3_MOD_R8_UH_EP_MOD register accessor: an alias for `Reg<R8_UEP2_3_MOD_R8_UH_EP_MOD_SPEC>`" ] pub type R8_UEP2_3_MOD_R8_UH_EP_MOD = crate :: Reg < r8_uep2_3_mod_r8_uh_ep_mod :: R8_UEP2_3_MOD_R8_UH_EP_MOD_SPEC > ; # [ doc = "endpoint 2(10) 3(11) mode and USB host endpoint mode control register" ] pub mod r8_uep2_3_mod_r8_uh_ep_mod ; # [ doc = "R8_UEP5_6_MOD register accessor: an alias for `Reg<R8_UEP5_6_MOD_SPEC>`" ] pub type R8_UEP5_6_MOD = crate :: Reg < r8_uep5_6_mod :: R8_UEP5_6_MOD_SPEC > ; # [ doc = "endpoint 5(13) 6(14) mode" ] pub mod r8_uep5_6_mod ; # [ doc = "R8_UEP7_MOD register accessor: an alias for `Reg<R8_UEP7_MOD_SPEC>`" ] pub type R8_UEP7_MOD = crate :: Reg < r8_uep7_mod :: R8_UEP7_MOD_SPEC > ; # [ doc = "endpoint 7(15) mode" ] pub mod r8_uep7_mod ; # [ doc = "R32_UEP0_RT_DMA register accessor: an alias for `Reg<R32_UEP0_RT_DMA_SPEC>`" ] pub type R32_UEP0_RT_DMA = crate :: Reg < r32_uep0_rt_dma :: R32_UEP0_RT_DMA_SPEC > ; # [ doc = "endpoint 0 DMA buffer address" ] pub mod r32_uep0_rt_dma ; # [ doc = "R32_UEP1_RX_DMA register accessor: an alias for `Reg<R32_UEP1_RX_DMA_SPEC>`" ] pub type R32_UEP1_RX_DMA = crate :: Reg < r32_uep1_rx_dma :: R32_UEP1_RX_DMA_SPEC > ; # [ doc = "endpoint 1 DMA buffer address" ] pub mod r32_uep1_rx_dma ; # [ doc = "R32_UEP2_RX_DMA_R32_UH_RX_DMA register accessor: an alias for `Reg<R32_UEP2_RX_DMA_R32_UH_RX_DMA_SPEC>`" ] pub type R32_UEP2_RX_DMA_R32_UH_RX_DMA = crate :: Reg < r32_uep2_rx_dma_r32_uh_rx_dma :: R32_UEP2_RX_DMA_R32_UH_RX_DMA_SPEC > ; # [ doc = "endpoint 2 DMA buffer address _ host rx endpoint buffer start address" ] pub mod r32_uep2_rx_dma_r32_uh_rx_dma ; # [ doc = "R32_UEP3_RX_DMA register accessor: an alias for `Reg<R32_UEP3_RX_DMA_SPEC>`" ] pub type R32_UEP3_RX_DMA = crate :: Reg < r32_uep3_rx_dma :: R32_UEP3_RX_DMA_SPEC > ; # [ doc = "endpoint 3 DMA buffer address;host tx endpoint buffer high address" ] pub mod r32_uep3_rx_dma ; # [ doc = "R32_UEP4_RX_DMA register accessor: an alias for `Reg<R32_UEP4_RX_DMA_SPEC>`" ] pub type R32_UEP4_RX_DMA = crate :: Reg < r32_uep4_rx_dma :: R32_UEP4_RX_DMA_SPEC > ; # [ doc = "endpoint 4 DMA buffer address" ] pub mod r32_uep4_rx_dma ; # [ doc = "R32_UEP5_RX_DMA register accessor: an alias for `Reg<R32_UEP5_RX_DMA_SPEC>`" ] pub type R32_UEP5_RX_DMA = crate :: Reg < r32_uep5_rx_dma :: R32_UEP5_RX_DMA_SPEC > ; # [ doc = "endpoint 5 DMA buffer address" ] pub mod r32_uep5_rx_dma ; # [ doc = "R32_UEP6_RX_DMA register accessor: an alias for `Reg<R32_UEP6_RX_DMA_SPEC>`" ] pub type R32_UEP6_RX_DMA = crate :: Reg < r32_uep6_rx_dma :: R32_UEP6_RX_DMA_SPEC > ; # [ doc = "endpoint 6 DMA buffer address" ] pub mod r32_uep6_rx_dma ; # [ doc = "R32_UEP7_RX_DMA register accessor: an alias for `Reg<R32_UEP7_RX_DMA_SPEC>`" ] pub type R32_UEP7_RX_DMA = crate :: Reg < r32_uep7_rx_dma :: R32_UEP7_RX_DMA_SPEC > ; # [ doc = "endpoint 7 DMA buffer address" ] pub mod r32_uep7_rx_dma ; # [ doc = "R32_UEP1_TX_DMA register accessor: an alias for `Reg<R32_UEP1_TX_DMA_SPEC>`" ] pub type R32_UEP1_TX_DMA = crate :: Reg < r32_uep1_tx_dma :: R32_UEP1_TX_DMA_SPEC > ; # [ doc = "endpoint 1 DMA TX buffer address" ] pub mod r32_uep1_tx_dma ; # [ doc = "R32_UEP2_TX_DMA register accessor: an alias for `Reg<R32_UEP2_TX_DMA_SPEC>`" ] pub type R32_UEP2_TX_DMA = crate :: Reg < r32_uep2_tx_dma :: R32_UEP2_TX_DMA_SPEC > ; # [ doc = "endpoint 2 DMA TX buffer address" ] pub mod r32_uep2_tx_dma ; # [ doc = "R32_UEP3_TX_DMA_R32_UH_TX_DMA register accessor: an alias for `Reg<R32_UEP3_TX_DMA_R32_UH_TX_DMA_SPEC>`" ] pub type R32_UEP3_TX_DMA_R32_UH_TX_DMA = crate :: Reg < r32_uep3_tx_dma_r32_uh_tx_dma :: R32_UEP3_TX_DMA_R32_UH_TX_DMA_SPEC > ; # [ doc = "endpoint 3 DMA TX buffer address and host tx endpoint buffer start address" ] pub mod r32_uep3_tx_dma_r32_uh_tx_dma ; # [ doc = "R32_UEP4_TX_DMA register accessor: an alias for `Reg<R32_UEP4_TX_DMA_SPEC>`" ] pub type R32_UEP4_TX_DMA = crate :: Reg < r32_uep4_tx_dma :: R32_UEP4_TX_DMA_SPEC > ; # [ doc = "endpoint 4 DMA TX buffer address" ] pub mod r32_uep4_tx_dma ; # [ doc = "R32_UEP5_TX_DMA register accessor: an alias for `Reg<R32_UEP5_TX_DMA_SPEC>`" ] pub type R32_UEP5_TX_DMA = crate :: Reg < r32_uep5_tx_dma :: R32_UEP5_TX_DMA_SPEC > ; # [ doc = "endpoint 5 DMA TX buffer address" ] pub mod r32_uep5_tx_dma ; # [ doc = "R32_UEP6_TX_DMA register accessor: an alias for `Reg<R32_UEP6_TX_DMA_SPEC>`" ] pub type R32_UEP6_TX_DMA = crate :: Reg < r32_uep6_tx_dma :: R32_UEP6_TX_DMA_SPEC > ; # [ doc = "endpoint 4 DMA TX buffer address" ] pub mod r32_uep6_tx_dma ; # [ doc = "R32_UEP7_TX_DMA register accessor: an alias for `Reg<R32_UEP7_TX_DMA_SPEC>`" ] pub type R32_UEP7_TX_DMA = crate :: Reg < r32_uep7_tx_dma :: R32_UEP7_TX_DMA_SPEC > ; # [ doc = "endpoint 7 DMA TX buffer address" ] pub mod r32_uep7_tx_dma ; # [ doc = "R16_UEP0_MAX_LEN register accessor: an alias for `Reg<R16_UEP0_MAX_LEN_SPEC>`" ] pub type R16_UEP0_MAX_LEN = crate :: Reg < r16_uep0_max_len :: R16_UEP0_MAX_LEN_SPEC > ; # [ doc = "endpoint 0 receive max length" ] pub mod r16_uep0_max_len ; # [ doc = "R16_UEP1_MAX_LEN register accessor: an alias for `Reg<R16_UEP1_MAX_LEN_SPEC>`" ] pub type R16_UEP1_MAX_LEN = crate :: Reg < r16_uep1_max_len :: R16_UEP1_MAX_LEN_SPEC > ; # [ doc = "endpoint 1 receive max length" ] pub mod r16_uep1_max_len ; # [ doc = "R16_UEP2_MAX_LEN_R16_UH_MAX_LEN register accessor: an alias for `Reg<R16_UEP2_MAX_LEN_R16_UH_MAX_LEN_SPEC>`" ] pub type R16_UEP2_MAX_LEN_R16_UH_MAX_LEN = crate :: Reg < r16_uep2_max_len_r16_uh_max_len :: R16_UEP2_MAX_LEN_R16_UH_MAX_LEN_SPEC > ; # [ doc = "endpoint 2 receive max length and USB host receive max packet length register" ] pub mod r16_uep2_max_len_r16_uh_max_len ; # [ doc = "R16_UEP3_MAX_LEN register accessor: an alias for `Reg<R16_UEP3_MAX_LEN_SPEC>`" ] pub type R16_UEP3_MAX_LEN = crate :: Reg < r16_uep3_max_len :: R16_UEP3_MAX_LEN_SPEC > ; # [ doc = "endpoint 3 receive max length" ] pub mod r16_uep3_max_len ; # [ doc = "R16_UEP4_MAX_LEN register accessor: an alias for `Reg<R16_UEP4_MAX_LEN_SPEC>`" ] pub type R16_UEP4_MAX_LEN = crate :: Reg < r16_uep4_max_len :: R16_UEP4_MAX_LEN_SPEC > ; # [ doc = "endpoint 4 receive max length" ] pub mod r16_uep4_max_len ; # [ doc = "R16_UEP5_MAX_LEN register accessor: an alias for `Reg<R16_UEP5_MAX_LEN_SPEC>`" ] pub type R16_UEP5_MAX_LEN = crate :: Reg < r16_uep5_max_len :: R16_UEP5_MAX_LEN_SPEC > ; # [ doc = "endpoint 5 receive max length" ] pub mod r16_uep5_max_len ; # [ doc = "R16_UEP6_MAX_LEN register accessor: an alias for `Reg<R16_UEP6_MAX_LEN_SPEC>`" ] pub type R16_UEP6_MAX_LEN = crate :: Reg < r16_uep6_max_len :: R16_UEP6_MAX_LEN_SPEC > ; # [ doc = "endpoint 6 receive max length" ] pub mod r16_uep6_max_len ; # [ doc = "R16_UEP7_MAX_LEN register accessor: an alias for `Reg<R16_UEP7_MAX_LEN_SPEC>`" ] pub type R16_UEP7_MAX_LEN = crate :: Reg < r16_uep7_max_len :: R16_UEP7_MAX_LEN_SPEC > ; # [ doc = "endpoint 7 receive max length" ] pub mod r16_uep7_max_len ; # [ doc = "R16_UEP0_T_LEN register accessor: an alias for `Reg<R16_UEP0_T_LEN_SPEC>`" ] pub type R16_UEP0_T_LEN = crate :: Reg < r16_uep0_t_len :: R16_UEP0_T_LEN_SPEC > ; # [ doc = "endpoint 0 transmittal length" ] pub mod r16_uep0_t_len ; # [ doc = "R8_UEP0_TX_CTRL register accessor: an alias for `Reg<R8_UEP0_TX_CTRL_SPEC>`" ] pub type R8_UEP0_TX_CTRL = crate :: Reg < r8_uep0_tx_ctrl :: R8_UEP0_TX_CTRL_SPEC > ; # [ doc = "endpoint 0 tx control" ] pub mod r8_uep0_tx_ctrl ; # [ doc = "R8_UEP0_RX_CTRL register accessor: an alias for `Reg<R8_UEP0_RX_CTRL_SPEC>`" ] pub type R8_UEP0_RX_CTRL = crate :: Reg < r8_uep0_rx_ctrl :: R8_UEP0_RX_CTRL_SPEC > ; # [ doc = "endpoint 0 rx control" ] pub mod r8_uep0_rx_ctrl ; # [ doc = "R16_UEP1_T_LEN register accessor: an alias for `Reg<R16_UEP1_T_LEN_SPEC>`" ] pub type R16_UEP1_T_LEN = crate :: Reg < r16_uep1_t_len :: R16_UEP1_T_LEN_SPEC > ; # [ doc = "endpoint 1 transmittal length" ] pub mod r16_uep1_t_len ; # [ doc = "R8_UEP1_TX_CTRL register accessor: an alias for `Reg<R8_UEP1_TX_CTRL_SPEC>`" ] pub type R8_UEP1_TX_CTRL = crate :: Reg < r8_uep1_tx_ctrl :: R8_UEP1_TX_CTRL_SPEC > ; # [ doc = "endpoint 1 tx control" ] pub mod r8_uep1_tx_ctrl ; # [ doc = "R8_UEP1_RX_CTRL register accessor: an alias for `Reg<R8_UEP1_RX_CTRL_SPEC>`" ] pub type R8_UEP1_RX_CTRL = crate :: Reg < r8_uep1_rx_ctrl :: R8_UEP1_RX_CTRL_SPEC > ; # [ doc = "endpoint 1 rx control" ] pub mod r8_uep1_rx_ctrl ; # [ doc = "R16_UEP2_T_LEN_R16_UH_EP_PID register accessor: an alias for `Reg<R16_UEP2_T_LEN_R16_UH_EP_PID_SPEC>`" ] pub type R16_UEP2_T_LEN_R16_UH_EP_PID = crate :: Reg < r16_uep2_t_len_r16_uh_ep_pid :: R16_UEP2_T_LEN_R16_UH_EP_PID_SPEC > ; # [ doc = "endpoint 2 transmittal length and Set usb host token register" ] pub mod r16_uep2_t_len_r16_uh_ep_pid ; # [ doc = "R8_UEP2_TX_CTRL register accessor: an alias for `Reg<R8_UEP2_TX_CTRL_SPEC>`" ] pub type R8_UEP2_TX_CTRL = crate :: Reg < r8_uep2_tx_ctrl :: R8_UEP2_TX_CTRL_SPEC > ; # [ doc = "endpoint 2 tx control" ] pub mod r8_uep2_tx_ctrl ; # [ doc = "R8_UEP2_RX_CTRL_R8_UH_RX_CTRL register accessor: an alias for `Reg<R8_UEP2_RX_CTRL_R8_UH_RX_CTRL_SPEC>`" ] pub type R8_UEP2_RX_CTRL_R8_UH_RX_CTRL = crate :: Reg < r8_uep2_rx_ctrl_r8_uh_rx_ctrl :: R8_UEP2_RX_CTRL_R8_UH_RX_CTRL_SPEC > ; # [ doc = "endpoint 2 rx control and USb host receive endpoint control register" ] pub mod r8_uep2_rx_ctrl_r8_uh_rx_ctrl ; # [ doc = "R16_UEP3_T_LEN_R16_UH_TX_LEN register accessor: an alias for `Reg<R16_UEP3_T_LEN_R16_UH_TX_LEN_SPEC>`" ] pub type R16_UEP3_T_LEN_R16_UH_TX_LEN = crate :: Reg < r16_uep3_t_len_r16_uh_tx_len :: R16_UEP3_T_LEN_R16_UH_TX_LEN_SPEC > ; # [ doc = "endpoint 3 transmittal length and host transmittal endpoint transmittal length" ] pub mod r16_uep3_t_len_r16_uh_tx_len ; # [ doc = "R8_UEP3_TX_CTRL_R8_UH_TX_CTRL register accessor: an alias for `Reg<R8_UEP3_TX_CTRL_R8_UH_TX_CTRL_SPEC>`" ] pub type R8_UEP3_TX_CTRL_R8_UH_TX_CTRL = crate :: Reg < r8_uep3_tx_ctrl_r8_uh_tx_ctrl :: R8_UEP3_TX_CTRL_R8_UH_TX_CTRL_SPEC > ; # [ doc = "endpoint 3 tx control and host transmittal endpoint control" ] pub mod r8_uep3_tx_ctrl_r8_uh_tx_ctrl ; # [ doc = "R8_UEP3_RX_CTRL register accessor: an alias for `Reg<R8_UEP3_RX_CTRL_SPEC>`" ] pub type R8_UEP3_RX_CTRL = crate :: Reg < r8_uep3_rx_ctrl :: R8_UEP3_RX_CTRL_SPEC > ; # [ doc = "endpoint 3 rx control" ] pub mod r8_uep3_rx_ctrl ; # [ doc = "R16_UEP4_T_LEN_R16_UH_SPLIT_DATA register accessor: an alias for `Reg<R16_UEP4_T_LEN_R16_UH_SPLIT_DATA_SPEC>`" ] pub type R16_UEP4_T_LEN_R16_UH_SPLIT_DATA = crate :: Reg < r16_uep4_t_len_r16_uh_split_data :: R16_UEP4_T_LEN_R16_UH_SPLIT_DATA_SPEC > ; # [ doc = "endpoint 4 transmittal length and USB host Tx SPLIT packet data" ] pub mod r16_uep4_t_len_r16_uh_split_data ; # [ doc = "R8_UEP4_TX_CTRL register accessor: an alias for `Reg<R8_UEP4_TX_CTRL_SPEC>`" ] pub type R8_UEP4_TX_CTRL = crate :: Reg < r8_uep4_tx_ctrl :: R8_UEP4_TX_CTRL_SPEC > ; # [ doc = "endpoint 4 tx control" ] pub mod r8_uep4_tx_ctrl ; # [ doc = "R8_UEP4_RX_CTRL register accessor: an alias for `Reg<R8_UEP4_RX_CTRL_SPEC>`" ] pub type R8_UEP4_RX_CTRL = crate :: Reg < r8_uep4_rx_ctrl :: R8_UEP4_RX_CTRL_SPEC > ; # [ doc = "endpoint 4 rx control" ] pub mod r8_uep4_rx_ctrl ; # [ doc = "R16_UEP5_T_LEN register accessor: an alias for `Reg<R16_UEP5_T_LEN_SPEC>`" ] pub type R16_UEP5_T_LEN = crate :: Reg < r16_uep5_t_len :: R16_UEP5_T_LEN_SPEC > ; # [ doc = "endpoint 5 transmittal length" ] pub mod r16_uep5_t_len ; # [ doc = "R8_UEP5_TX_CTRL register accessor: an alias for `Reg<R8_UEP5_TX_CTRL_SPEC>`" ] pub type R8_UEP5_TX_CTRL = crate :: Reg < r8_uep5_tx_ctrl :: R8_UEP5_TX_CTRL_SPEC > ; # [ doc = "endpoint 5 tx control" ] pub mod r8_uep5_tx_ctrl ; # [ doc = "R8_UEP5_RX_CTRL register accessor: an alias for `Reg<R8_UEP5_RX_CTRL_SPEC>`" ] pub type R8_UEP5_RX_CTRL = crate :: Reg < r8_uep5_rx_ctrl :: R8_UEP5_RX_CTRL_SPEC > ; # [ doc = "endpoint 5 rx control" ] pub mod r8_uep5_rx_ctrl ; # [ doc = "R16_UEP6_T_LEN register accessor: an alias for `Reg<R16_UEP6_T_LEN_SPEC>`" ] pub type R16_UEP6_T_LEN = crate :: Reg < r16_uep6_t_len :: R16_UEP6_T_LEN_SPEC > ; # [ doc = "endpoint 6 transmittal length" ] pub mod r16_uep6_t_len ; # [ doc = "R8_UEP6_TX_CTRL register accessor: an alias for `Reg<R8_UEP6_TX_CTRL_SPEC>`" ] pub type R8_UEP6_TX_CTRL = crate :: Reg < r8_uep6_tx_ctrl :: R8_UEP6_TX_CTRL_SPEC > ; # [ doc = "endpoint 6 tx control" ] pub mod r8_uep6_tx_ctrl ; # [ doc = "R8_UEP6_RX_CTRL register accessor: an alias for `Reg<R8_UEP6_RX_CTRL_SPEC>`" ] pub type R8_UEP6_RX_CTRL = crate :: Reg < r8_uep6_rx_ctrl :: R8_UEP6_RX_CTRL_SPEC > ; # [ doc = "endpoint 6 rx control" ] pub mod r8_uep6_rx_ctrl ; # [ doc = "R16_UEP7_T_LEN register accessor: an alias for `Reg<R16_UEP7_T_LEN_SPEC>`" ] pub type R16_UEP7_T_LEN = crate :: Reg < r16_uep7_t_len :: R16_UEP7_T_LEN_SPEC > ; # [ doc = "endpoint 7 transmittal length" ] pub mod r16_uep7_t_len ; # [ doc = "R8_UEP7_TX_CTRL register accessor: an alias for `Reg<R8_UEP7_TX_CTRL_SPEC>`" ] pub type R8_UEP7_TX_CTRL = crate :: Reg < r8_uep7_tx_ctrl :: R8_UEP7_TX_CTRL_SPEC > ; # [ doc = "endpoint 7 tx control" ] pub mod r8_uep7_tx_ctrl ; # [ doc = "R8_UEP7_RX_CTRL register accessor: an alias for `Reg<R8_UEP7_RX_CTRL_SPEC>`" ] pub type R8_UEP7_RX_CTRL = crate :: Reg < r8_uep7_rx_ctrl :: R8_UEP7_RX_CTRL_SPEC > ; # [ doc = "endpoint 7 rx control" ] pub mod r8_uep7_rx_ctrl ;
|
